All of the parts used on Hyperion
Hyperion Off-The-Shelf Parts
Antirock Sway Bar
Barnes 4wd axle swap truss
Custom Driveshafts by Carolina Driveline
I prefer to shop local when possible, so I found my nearest custom driveshaft shop.
Rough country Longarm kit
Upgraded the main joints to johnny joints as soon as it was installed. The extra width of the new axle but some side-to-side play in the xflex joints that is fault of the 4-piece design that RC uses.
(will get replaced with real 3 or 4 link later on)
Johnny Joints for Longarm
These are the correct joints for the main links on Rough Country longarm kits. do yourself a favor and don't even install the longarm kit without these joints.
Ironman 4x4 Fab Shackle Relocation Brackets
used to a, fix my shackle angle, and b give a little bit more lift in the rear.
Barnes 4wd Weld on High Steer
I do not recommend the one I have used; they do not set a proper geometry and severely reduce overall steering angle. I have linked the correct brackets to use with a factory steering setup.
We need your consent to load the translations
We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.